Vessel is water work ready. Heavy duty aluminum work boat manufactured by Patriot fabrication in 1997 (http://www.patriotmarinefab.net/ Patriot has changed their focus to other marine products, but they are still in business and will build boat on request This boat was built as research boat for university marine program. There is door in the side of hull that is hinged on the bottom and folds down, becoming heavy duty boarding ladder with built in steps. There is davit mounted starboard side just aft of pilothouse and just forward of the hinged hull door. Pilothouse is nearly all the way forward to provide large work deck.
Boat was been stripped to the bare hull of engine, wiring, lights, switches, etc. Nothing remained except the aluminum and the windows! Original fuel tank was removed, cleaned, inspected, pressure tested, reinstalled with new fill, supply, vent hoses and fuel level sender. Easily accessible with large access panel above it.
Brand new: Hydraulic steering (2) Bilge pumps Johnson 2200 GPH and Johnson 1100 GPH) and Cole Hersee helm switches Blue Seas gang breaker panel All new tinned copper wiring Ancor)All wire connectors are heat shrinked 8 Shakespeare VHF antenna Standard Horizon VHF Yamaha 704 binnacle mount controls 3300 series heavy duty control cables (2) group 24 Deka batteries All deck hatches Racor fuel water separatorAqua Signal LED navigation lights Fuel tank is approximately 70 gallons.Light mast articulates to reduce height for over the road travel. Bottom paint and rubrail are only cosmetic and while this would make the boat look 1000% better cosmetically, have run out of time to complete at moment. can have this completed by marine contractor at quote of $4000 if you so choose. Materials are around $1000 so do it yourself and save! The hull appears clean, solid and very sound with no electrolysis observed upon inspection. Only exception is where the original rubrail was installed with there is some pitting where the original fasteners were through the hull. This has ZERO effect on hull strength, integrity or watertightness.
2003 Yamaha 200 Hp OX66 fuel injected with approx 671 very well maintained hours. Came from freshwater used boat and engine is extremely clean and fully serviced with new water pump, thermostats, VST filter, primary filter and gear lube. Runs excellent and very strong with perfect compression. I sought out this specific model engine as it is known to be nearly bulletproof", highly reliable and will go thousands of hours when maintained well. This engine has been extremely well cared for up until now and should have very long service life. Remaining items: Heavy duty rub rail installed about $800 in materials). Bottom paint.
Vessel is work ready and offered at fraction of replacement. Everything was replaced with quality components to last and endure commercial duty.
The trailer: Trailer is NOT included. currently cannot file for the MA title due to the pandemic. also dont desire to. It appears to be solid and has new bearings and tires/ rims as of December 2019. If you want it for the cost of the parts put into it about $1000) will do that to facilitate the sale and transport of the boat. If after the pandemic you want me to get title we can discuss. The brakes are non operable. The lights are new. transported this boat over 200 miles recently without issue.
I welcome any potentially interested party, or representative on their behalf, to come inspect PRIOR bidding. Vessel is sold without any guarantee or warranty whatsoever. Free and clear MA title in my name will be transferred upon closing of sale.
Also published at eBay.com:
WowCarSales.com - the site is not responsible for the published ads, is not the guarantor of the agreements and is not cooperating with transport companies.
Do not trust offers with suspiciously low price.
Other classic Notspecified cars offered via internet auctions: